it takes around 3hrs to change them all , but i would sugest that you do the plugs , plug seals as everything has to come off to do the liftersOriginally Posted by Desperado
it takes around 3hrs to change them all , but i would sugest that you do the plugs , plug seals as everything has to come off to do the liftersOriginally Posted by Desperado
heya,
how soon would you be wanting deposit? and then when would you want the rest?
cheers,
ash
The sooner i get all the deposits, then the sooner i will place the order. Lead time on receiving the Lashers is 6 weeks. I would then require Full Payment before dispatching them to you. But as i said above, i will hold onto any Lashers that have had the deposit paid on, until Full Payment has been received for those who may need a bit more time to raise the funds.Originally Posted by c0xxy
Cheers
Wodj
If this has been asked shoot me
Are these uprated or standard replacements Glenn please?
Well there 2mm top holes and 1.5mm side holes as stated in the 1st postOriginally Posted by Steve-vr-4ish
Can't remember exactly what the original sizes are ?
But members who have changed there lashers have had larger holes in some, and even smaller holes. Both have gotten rid of the ticking
So i'll advertise these as "New" as that seems to be the most important factor to Tick Free motoring
Wodj
1st Post now updated with Members who have confirmed with Deposit Paid
Cheers
Wodj
Glenn, I'm very interested Mine became very noisy right now.
But... only one condition.... I need your help with swapping ones . Maybe some session in Peterborough with playing with tappets...
I'll pay you deposit after my coming back to UK (9th Sept).
Ex: Galant VR4
Running 268 HP ATW and 443 Nm torque at 0.9 bar
Now: Lancer Evolution 8 FQ-300
Running 325 HP ATW and 510 Nm torque at 1.6 bar
Sounds good to meOriginally Posted by swinks
I'll update 1st post with your details
Cheers
Wodj
I get just to double check,these will fit the v6 24v?
No they won't fit the normally aspirated 6A13 Sorry ..Originally Posted by c0xxy
Wodj
C'mon Peeps
There are 16 votes in the poll above
But only 4 Confirmed as wanting them
The faster i get the deposits , then the faster i can get them ordered
Cheers
Wodj
good job i checked... damn. stuck with the tick! must buy vr4!
OK.. Now including the Members that i have deemed in maybe being interested, 2who have posted in this thread, added to the confirmed members wanting a set ! It totals 13 The poll indicates 16 possibles
So where are the rest of the members who have voted gone to
I am going to Page the members who may possibly want a set. So stand by your Pager
Cheers
Wodj
Last edited by Wodjno; 07-09-2010 at 02:55 PM.
now than mate i would like to get a set but im short on cash at the moment. so for me if it was nearer christmas i would of got them
i was one of them, thought they'd fit. gutted as mines nearly as loud as the vid earlier in the thread.
ash
No worries mate ..Originally Posted by c0xxy
Thanx for letting me know
If i can get 20 confirmed orders
I may even be able to sqeeze the price down to £125 per set.. But definitely down to £130 a set
Cheers
Wodj
1 more vote added to the Poll today Mr Dubya See i suspect
If the part number is MD171130 / MD376687 then the German company I got mine from may have ones for the V6. Here's the e-bay link: http://cgi.ebay.co.uk/ws/eBayISAPI.d...=STRK:MEWAX:ITOriginally Posted by c0xxy
Note that the Galant VR-4 or 2.5 V6 are not listed in their compatibility list but these are the lashers that are in my VR-4 now. I just got the part number from ASA and compared to what they're selling. After ordering they asked me to confirm the model, engine size, type, code etc before confirming that they would despatch the goods so they seem reasonable enough to deal with. I don't know if the VR-4 ones will fit the V6 but if you want some then it may be worthwhile e-mailing these or sending a msg through e-bay.
if the highlighted bit is the correct part... the part numbers would be:
MD151382
MD377560
why would the bottom one be red?
ash