Uprated Clutch

[pumaproton]

I've searched the archives of the forum and would like a Exedy clutch. It seems one for an FTO can fit, but the kit on Camskill comes with a BRG466 Bearing yet I believe the Galant needs a BRG439.

The BRG439 is 65.6mm and the BRG466 is 69.8mm. Would the FTO kit be OK, or should I get the pressure plate and clutch cover but get the Galant bearing?

[psbarham]

2.5 v6 n/a? if so the fto kit works fine, I fitted one to my old one.

[pumaproton]

2.5 v6 n/a? if so the fto kit works fine, I fitted one to my old one.

Sorry its for a 2.5 V6 SOHC. Do you know which kit you fitted, if you can remember the kit number? Exedy make a standard clutch like this one:

http://cgi.ebay.co.uk/ws/eBayISAPI.d...m=310251681295

and they also make a sports/fast road kit:

http://www.camskill.co.uk/products.p...d=m3b0s12p7615

I'm thinking its probably fine but I just want to make sure before taking the transmission off and finding out otherwise!

[psbarham]

I'm 99% certain its the ebay one, In fact i think it was the same seller, it worked a treat on mine, and is still going strong even though the new owner rags the arse off it