Front, o/s driveshaft needed please and postage to ab301sj.
The threads on mine got buggered while being pushed out with a 10 tonne press, hammers, cold cut chisels and several applications of a very hot gas torch!
Many thanks,
James.
Front, o/s driveshaft needed please and postage to ab301sj.
The threads on mine got buggered while being pushed out with a 10 tonne press, hammers, cold cut chisels and several applications of a very hot gas torch!
Many thanks,
James.
I;m sure i have one at the unit James , let me check tomorrow night and get back to you
Kanji Automotive Solutions - Looking after your Pride and Joy
Servicing - Upgrades - Tuning - Pre Used Parts - Undersealing - Advice - Consultancy
PM or Call me for any work requests or to discuss your requirements
Ebay Shop -> http://stores.ebay.co.uk/sun-wizzard...=p4634.c0.m322
To contact the CVR4 Staff please see HOW TO: Contact Committee or Moderators
Any news John?
If John is struggling, I've got one kicking around. I know the ABS ring is cracked on mine though.
I did not get a chance to go over today as i worked from home , will deffo check tomorrow evening and get back to you
But more than happy for nick to jump in
If yours is better condition John, no point. And I don't want to become someone who fights for friends business! I was just mentioning in case it solved a few problems.
You two are just too polite for words! Did you get a chance to look tonight John?
Cheers
Yeah I did and I could not find the one you want off a car so please do take nick up on his offer
I have a couple of abs rings in the shed if you need one
Ask a simple question, never receive an answer these days
Just to clarify things for me. What effect will the cracked abs ring have on the braking system?
Also does anyone know if it's possible to buy just the end of the driveshaft with the thread and retro fit it?
take the ring off your one and clean up nicks one then put the ring on it
a split in the ring will increase the duration of the pulse and could fool the abs system into thinking it was sliding that wheel
Ah excellent! If I can take you up on your kind offer Nick that would be great! And then I can couple that with an abs ring from you peter and my world will be a good place once more!
don't force the ring on as it will split , should slide on easily
How do you remove/refit the ring?
gentle walking it off all round it
H'ok. Good stuff. Just have to wait for Nick to get in touch now!
Cheers again guys!
would soak it in gt85 or wd40 for a few days before hand to break any rust down
Sorry, just been a bit busy for a couple of days!
I'll reply to your PM shortly, James. For your info, I didn't realise that the ring was cracked on mine until I removed the drive shaft. I wasn't having ABS issues. Having said that, if I was fitting it I would make sure that I put a new ring on, doing what John suggested above.
Cheers Nick, all advice is taken on board and well received!
Thanks once again.
The mighty Leedsnum has gone but the Airtrek mods will soon fill this space
How To:Contact Committee or Moderators.