I'd also be interested, Mr Swinks!
I'd also be interested, Mr Swinks!
And here
Yes please Tomasz.
Another here
Possibly the only VR4 that was driven by the current owner before being registered..... & it's a UK car
I got one set for sale, it wont work with my carbon bonnet, its brand new, have a look here
SOLD
Last edited by adaxo; 06-07-2012 at 08:02 PM.
His FL Legnum VR4 running 238.8 ATW HP and 500Nm @1.05 bar on LPG
Hers PFL Legnum VR4 COTY see here for full story
Looking for AMSoil? click here
living in north west?
would you like to meet with other VR4 fanatics?
click here
My recent and ex Mitsubishi's
OK, guys will do GB in near future.
There will be separate purchase of struts and ball joints/bolts.
Adapter plate won't be subject of GB. Supplier run out of stock. So plates must be made individually. There is good write up so anyone with little skills use angle grinder and drill should be able to make them himself.
Ex: Galant VR4
Running 268 HP ATW and 443 Nm torque at 0.9 bar
Now: Lancer Evolution 8 FQ-300
Running 325 HP ATW and 510 Nm torque at 1.6 bar
yes put me down for a pair tooo please