I've been looking for a while for a decent condition bumper as the front bumper just catches on everything and it's stuffed. The passenger's side skirt also needed work, as a previous owner had damaged the original and painted straight over the top of a green one - and the paint cracked on it.
So the other day I found a deal that was quite good - a bodykit for less than the price of a bumper from the wrecker - the bodykit needs prepping and painting, but I would need to repaint the bumper from a wrecker anyway, as they can't guarantee the paint condition and colour.
This is how I got the kit:
IMG_0461 (Medium).JPG
IMG_0463 (Medium).JPG
IMG_0462 (Medium).JPG
I started off with sanding it down with 240 grit - there are some small spots that need to be fixed up, I'm thinking that filler primer will do the job for the small spots.
The rear bumper pieces need a fair bit of work around where the screws attach - but a Dremel will fix that
This is how I left it after today.
IMG_0464 (Medium).JPG
I sprayed the bumper with one coat of primer from a spraycan, and once dry wet sanded with about 400 grit to identify any spots that need filling. Most of the bumper is good - the primer from the can was more of the issue. I'm trying to borrow a friend's air compressor and spray gun so I can do it more evenly, as an entire can went on that first coat.
IMG_0465 (Medium).JPG
Side skirt with the door trim piece - I tried a different primer on the door trim piece to see how the colour would match with my car. It'll get sanded off sometime this week when I get some time.
IMG_0466 (Medium).JPG