would this work?
1. fit a uk tailgate
2. remove external fog light
3 take the wiring from the external fog light and feed it into the uk fog lights
or are there some other complications?
would this work?
1. fit a uk tailgate
2. remove external fog light
3 take the wiring from the external fog light and feed it into the uk fog lights
or are there some other complications?
1998 2.0 GLS>1999 2.4 GDI>2001 2.5 sport>1997 VR4 + 2000 2.5 sport
1997 legnum (manual)
CUSCO rear strut brace
BILSTEIN springs on uprated shocks
3" S/S downpipes and exhaust
induction kit
EVO V RS transfer box
EVO VIII brembos
HEL brake lines
V6 sport interior
laser cut engine cover
GRP EVO style bonnet
18" inovite redlines
HKS SSQV
2003 Mazda 6 2.0 TS estate
How about..
Remove external Foglight.
Wire switch to the tailgate brake lights.
Still leaves you with 1 x high level brake light and 2 outer wing brake lights
Job done
i may be swapping the tailgate anyway and having the spoiler sprayed to match it
dont the fogs have to have different lenses to brake lights? i know both are 21 watt but i thought it was the lens that made the brake lights brighter
so why do they stick an ugly thing on the back bumper instead of just doing the job properly?
Cos any Moron can do that
what about the switch? it is a big hassle to fit uk switches ie front above the rear on the dashboard?
i would rather have the interior as it is in the V6. especially as i am swapping my interior into the VR4 including the boot floor if i can. im not keen on the all in one set up so i am hoping the 3 way boot floor will fit. much of the exterior will be going over too