I'm opening thread regarding GB of forged conrods for 6A13TT engines.
Subject of purchase:
Hi-Performance H-Beam PRISM connecting rods. Now You can built extreme powerful engine and produce more HP without worry about damage it. All PRISM rods are produced from one-piece forging, Cr-Ni-Mo 4340 alloy, and have special 3D design, so they are stronger and lighter than stock connecting rods.
All PRISM 4340 connection rods feature...
• One-piece forging, 4340 AISI/SAE alloy, vacuum degassed to remove impurities
• Full CNC machined surface
• 3D design offers reduced weight and maximum strength to weight ratio
• Heat-treated to Rockwell C38-45
• All forgings are X-rayed to insure quality.
• Fully shot peened to stress relieve the metal.
• Packaged in weight matched sets end to end +/- 1 gram.
• Balanced end to end
• Supplied with bronze wrist pin bushings for floating piston pins.
• Ready for installation 3/8” or 7/16” rod bolts (see Your application)
• For applications +7000rpm we recommended ARP2000 bolts or better
• Visual inspection ensures that every our rod is defect free
Dimensions of ordered rods:
190 = 19.0 mm (pin dia.)
540 = 54.0 mm (big end bore dia)
1384 = 138.4 mm (center to center length)
pin width = 20 mm
big end bore width = 20 mm
Pictures:
p1000214.jpgP1000211.jpgDSCN4704.jpgPRISM-korbowod.jpgPRISM-odkuwka.jpgp1000220.jpg
Price: 500 GBP a set, excluding shipping. Additional surcharge for shipping within UK and outside UK depends on location.
We have to place order before 10th August hence all ordered sets can be brought to UK for no extra cost personally by me.
We need minimum order of 5 sets.
Additional information:
1. ARP bolts can be purchased from following eBay sites:
- ARP L19 bolts for 179 USD per set of 12: http://www.ebay.co.uk/itm/3604681145...84.m1423.l2649
- ARP2000 bolts for 130 USD per set of 12: http://www.ebay.co.uk/itm/3604688721...84.m1423.l2649
2. Conrods rev range is in theory up to 9000rpm if properly mounted. This is determined by several factors, i.e. right bolts used, weight and size pistons, pins diameter, proper engine tune. Anyway, got answer that this conrods should last up to 9k rpm.
Further info can be found in this thread:
http://www.clubvr4.com/forum/showthr...up-order/page2
Terms and conditions:
1. Deadline for payments is 5th August 2012. Details can be obtained by PM. Preferred method either PayPal or bank transfer.
2. Minimum of confirmed payments to launch purchase is: 5
3. There will be update here in this thread regarding status of each order.
4. Complete order for conrods will be placed on 10th August
5. Ready made conrods will be delivered to UK personally by me and then shipped individually.
6. If total order of 5 sets fail due to no interest, all money already transferred will be refunded back on 5th August.
List:
1. scott.mohekey - PAID
2. Kenneth - PAID
3. Barney - PAID
4. Anderz - PAID
5. Gly - PAID
*colours
white - interest expressed
red - payment received
green - purchased conrods dispached home
Enjoy guys!