Right then, now I have my FMIC fitted I am toying with the idea of side mounting my numberplate as the majority of the intercooler is blocked by the numberplate!
I have attached a couple of pics of some ideas Ive tried and am after opinions on where looks best to fit it.
Also does anyone know if there are any rules and regs/laws etc that state the maximum angle of the numberplate. i.e if I bolt straight onto the side of the bumper (just above the front fogs) this will be at too much of an angle and will not sit flat to the front.
Pics:
21072012626.jpg
21072012627.jpg
The mounts I have made behind the numberplate come from a donor bumper that I have b@st@rdised.
Any and all opinions welcome.
p.s I know the original mount looks crap but I have a cunning idea to chop it up and replace the bumper mesh.