1 1/16" master cylinder

[fassi1]

Very cheap master cylinder sameas Evo6.
Bought one and looks exactly the same as ours so no mods needed.
http://www.ebay.co.uk/itm/1608720290...84.m1497.l2649
Anyone interested grab bargain.

[Gly]

GTO wont work as the cup over hangs on the wrong side,
also our cup/fill sensor is different so just can swap them over

[fassi1]

Before i bought it i asked seller if thats 1 1/16" cylinder same as Evo 6 and send part number too MR289079.
His answer was yes thats exactly the same.
I had it in my hand yesterday with bonnet up and they look exactly the same, fittings exactly the same, the only difference is the sensor on the other side.

[pezza]

Hope it all goes in ok...When are you going to get that fitted?

[Gly]

the gto cup over hangs on the right most side, (these will hit the strut tower)

evo and vr4 over hang on the left most side.

been down this road a very long time ago

http://www.clubvr4.com/forum/showthr...l=1#post227806

http://www.clubvr4.com/forum/showthread.php?22322

[fassi1]

Looks like u r right but cylinder still should be the same as Evo 6 as it has written on the bottom 1 1/16"
so shoud b able to just swap the cups over.

[Gly]

how the cups are mounted varies and isn't always interchangeable.

1 1/16 is only the size of the master, doesnt mean its entirely the same

[fassi1]

Im aware of that bbut will give a go and see what happens

[fassi1]

GTO master cylinder with its cup successfuly fitted

[c0xxy]

pics buddy! lol. i got an n/a gto in bits, ya know if they have the same cylinder?

[fassi1]

Pics
http://www.clubvr4.com/forum/showthr...274#post722274