Think my Turbos are going

[KiwiTT]

I am starting to hear rattles at 2500-3000rpm.

A valid observation ?

EDIT: Car has done 191,000km.

[taylor]

check the clip that holds the waste gate actuator to the flap on the hotside. these are known to come loose and rattle around

[Subaru ETA]

Yeah, probably more the waste gate then the turbo itself

[Adam.Findlay]

yep carl had the same issue. wastegate was loose and rattling around.

[KiwiTT]

Excellent.

Don't know much about engines, so can some one post a picture about where I should look for this "waste gate actuator". That will be a great help.

[taylor]

wg_arm_350.jpg

Excellent.

Don't know much about engines, so can some one post a picture about where I should look for this "waste gate actuator". That will be a great help.

not a vr4 but same dealio

[Adam.Findlay]

instead of a C clip the vr4's td03's have a R clip. much like a split pin., but in the same location as in the picture taylor put up

[KiwiTT]

OK I;ll look for that. thanks

[Davezj]

You will be able to see he rear one but not the front oneas it is mounted from underneith.