This is the Turbosmart MBC I fitted a few days ago;
An I got round to fitting a boost gauge, I didn't want it in my face all the time, I wanted it somewhere subtle and out of the way but still visible so I put it here;
and switched on;
I don't know what I was boosting at where I had the boost controller set before as I wound it back out to stock boost when I fitted the gauge, I am getting 8psi holding a steady 7psi as stock which is a couple higher than a stock pre-facelift auto, I am guessing that is the exhaust at work? (Full turbo-back with decat) I am heading out tonight to do some 3rd gear runs and I am going to set it to around 12psi or as close to.
I have also ordered a bigger intercooler, I have seen folks fitting the fairly commonly sized 600x300x75 without issue, but I wanted one that could be fitted almost as bolt on direct fit with now other mods so mine is a 600x250x75. I am hoping this will fit just under the crash bar so won't need modding. I doubt i'll notice the missing 50mm height!