Still interested, depending on total cost.
Also, I assume same as those collars, that these will align the sub frame in the same way?
Still interested, depending on total cost.
Also, I assume same as those collars, that these will align the sub frame in the same way?
Last edited by Colin Wiltshire; 30-05-2013 at 04:32 PM.
bump.
im still in. dont care about the rubber washer thing. i'm good with all solid.
if you have spare subframes you probably have spare arms... and i have the prothane eclipse poly kits (arms&knuckles not subframes) to test out. same problem here. no time. some sort of arrangement, maybe?
EDIT: i'm in for the whole lot, especially the diff mounts for the open diff casing.. mine not so good.
do you need to clear up with people what diff they have or is it one size fits all?
that video is good. both ways are fine but you cant have both.
Last edited by MunkyWrench; 12-07-2013 at 07:24 AM.
"You can tow a trailer with your moped, but you can't tow any other sort of vehicle. Your moped can't be towed by another vehicle." Land Transport Safety Authority Fact sheet 43 -Mopeds
I have 3 sets underway. just got really bogged under with exams and other commitments between last update and now. hopefully get some lathe time next weekend and finish a set or two off. especially now I have a propper parting tool.
Umm i dont have spare arms unfortunatly, but my car is in pieces currently so can test fit to that, then reimburse you for the cost, or remove them and send them back and purchase my own.
Well the bushings im making are
4 x diff mount bushings.
4 x rear sub frame bushings
3 x Front sub frame bushings
and AYC and Open diff casings both use the same mount points. only difference would be if someone has Super AYC which requires 10mm spacers between the bushings and the diff, on the back two mounts
some pics of 4/6 of one set of front subframe bushes
I don't suppose you made any diff mounts in the Urethane?
Are these still being done?