EOI: Solid alloy or urathane Subframe bushings

[Colin Wiltshire]

Still interested, depending on total cost.

Also, I assume same as those collars, that these will align the sub frame in the same way?

[MunkyWrench]

bump.

im still in. dont care about the rubber washer thing. i'm good with all solid.

if you have spare subframes you probably have spare arms... and i have the prothane eclipse poly kits (arms&knuckles not subframes) to test out. same problem here. no time. some sort of arrangement, maybe?

EDIT: i'm in for the whole lot, especially the diff mounts for the open diff casing.. mine not so good.

do you need to clear up with people what diff they have or is it one size fits all?

that video is good. both ways are fine but you cant have both.

[Adam.Findlay]

bump.

im still in. dont care about the rubber washer thing. i'm good with all solid.

if you have spare subframes you probably have spare arms... and i have the prothane eclipse poly kits (arms&knuckles not subframes) to test out. same problem here. no time. some sort of arrangement, maybe?

EDIT: i'm in for the whole lot, especially the diff mounts for the open diff casing.. mine not so good.

do you need to clear up with people what diff they have or is it one size fits all?

that video is good. both ways are fine but you cant have both.

I have 3 sets underway. just got really bogged under with exams and other commitments between last update and now. hopefully get some lathe time next weekend and finish a set or two off. especially now I have a propper parting tool.

Umm i dont have spare arms unfortunatly, but my car is in pieces currently so can test fit to that, then reimburse you for the cost, or remove them and send them back and purchase my own.

Well the bushings im making are
4 x diff mount bushings.
4 x rear sub frame bushings
3 x Front sub frame bushings

and AYC and Open diff casings both use the same mount points. only difference would be if someone has Super AYC which requires 10mm spacers between the bushings and the diff, on the back two mounts

[Adam.Findlay]

some pics of 4/6 of one set of front subframe bushes

[Macca]

I don't suppose you made any diff mounts in the Urethane?

[Colin Wiltshire]

Are these still being done?

[Adam.Findlay]

I don't suppose you made any diff mounts in the Urethane?

nope never did any in urethane

Are these still being done?

I have 3 unfinished sets. just ended up running out of time to do it all.
I should really get back into it and finish a few sets off.