MD362895, mapping info

[sbn1979]

Just after some info with regards this ECU, any ideas of the chipset in it and im guessing the latest ecuflash can read/write without any problems?

Any example Roms or xmls would be nice

Thanks

[Nick Mann]

Have a search round the site, there are assorted snippets of info. I can't answer your question, but I think the answer will be on here somewhere.

[sbn1979]

Thanks Nick, yes ive been collaborating snippets of info but some info conflicts ie 7203 is not mappable then it is, maybe that's a date thing, Im an Evo man myself but my friend has asked me to have a look at his so case id is all I have at the mo! thanks

[Nick Mann]

If it is a plastic case ecu it is almost certainly flashable with an openport 2.0 cable and ecu flash. Metal cases are flashable but you need more expensive software.

[Nick Mann]

Just searching on here for the part number it looks to be a face lift ecu which will be a plastic case, most likely a 7202 and therefore should be easily flashable.

[Davezj]

info from ASA,
ecu is originally fitted to all models of VR4 from Aug 98 to April 99 and some models from april 99 to aug 2000, it should be a plastic case 7202 prcessor which is fashable with ecufash and open port 2.0 cable with flash extention cable.

[sbn1979]

Thanks dave, 7202, is evo 5/6, 7203f is evo 6, 7203FA is tommi mak and ralliart, same chipset, thanks for input dave! :-)