all 4 camshaft

[dutch driver]

i need all 4 camshaft (of the vr4).
my cams are to much damaged (rust).

how can help me out.
cheers

[jkrzysztof80]

I have some if Swinks don't want them you can have them.

[dutch driver]

Would be perfect !!!!!

[AKKO]

I also have a set, though postage from Australia might be a bit steep

[dutch driver]

I also have a set, though postage from Australia might be a bit steep

i will keep it in mind chris.
i might bought those from other kris

[hbkuk1]

Fto non mivec cams fit too 6a12

[Adam.Findlay]

Fto non mivec cams fit too 6a12

I will have to get my hands of a set of these and measure them on the cam doctor at work, as often N/A engines have more agressive cam profiles compared to turbo motors.

SR20DET vs SR20DE is a good example the N/A cams have a few more degrees duration and a touch more lift.

[hbkuk1]

I will have to get my hands of a set of these and measure them on the cam doctor at work, as often N/A engines have more agressive cam profiles compared to turbo motors.

SR20DET vs SR20DE is a good example the N/A cams have a few more degrees duration and a touch more lift.

Exacly it's probably a good cheap upgrade

[Adam.Findlay]

Exacly it's probably a good cheap upgrade

well possibly not. as the 6A12TT cams are smaller than the 6A13TT ones

[hbkuk1]

How do mean smaller ? The 6a12 cam are exactly the same as the 6a13 I know this as I removed the. 272 cams from my fto and fitted them in the vr4 and fitted the vr4 cams in the fto to sell it

[Adam.Findlay]

smaller, as in lift and duration. not in external dimensions

[Wodjno]

i will keep it in mind chris.
i might bought those from other kris

If your still looking for a full set of cams? I have a set 2 sets actually
And a set of Non Mivec 6A12 FTO cams

[jkrzysztof80]

Posted yesterday.

[dutch driver]

yep.

but very intressing info.
cheers guys