Results 1 to 7 of 7

Thread: ayc issues

  1. #1

    Offline
     
    Name
    Ryan
    Join Date
    Oct 2013
    Last Online
    01-06-2014
    Posts
    40
    Country
    United Kingdom
    Car
    Galant vr4 360
     

    ayc issues

    hi guys having a bit of bother with my ayc lights.

    When started up the ayc lights up and goes out. when you move all lights come on. oncu hit 40mph one bar drops off then 45 two are out and then 50 ts are out. once s down to 50 again one light comes on 45 second comes on 40 all three are on Any one got any ideas

  2. #2
    elnevio's Avatar

    Offline
     
    Name
    Nev
    Join Date
    Dec 2007
    Last Online
    17-04-2024
    Membership ID
    510
    Posts
    17,956
    Country
    United Kingdom
    Location
    Gloucester
    Car
    VR-4+Panda+shed
    My Garage
    Visit
     
    Are the tyres different sizes? Are the pressures identical?

    Pull the fault codes. I wouldn't be surprised if there is a wheel sensor issue.
    October 2023 fleet status: 100% operational


    | Legnum VR-4S | Fiat Panda 100HP !! | a blue one! | Avensis T-180 | VR-4 parts van! |

    Why not become a full member of CVR4 and enjoy the additional benefits membership brings?! Information here.

  3. #3

    Offline
     
    Name
    Ryan
    Join Date
    Oct 2013
    Last Online
    01-06-2014
    Posts
    40
    Country
    United Kingdom
    Car
    Galant vr4 360
     
    tyres are the same size. Ill check the pressure in them. it was poring down with rain with a run up the motorway then wet to start it 10 mins later andit was on

  4. #4
    Subaru ETA's Avatar

    Offline
     
    Name
    David
    Join Date
    May 2006
    Last Online
    10-02-2024
    Posts
    5,490
    Country
    New Zealand
    Location
    Blockhouse Bay
    Car
    Corvette
    My Garage
    Visit
     
    Agree with Nev. probably low tyre pressure.
    To contact the CVR4 Staff please see HOW TO: Contact Committee or Moderators

  5. #5
    elnevio's Avatar

    Offline
     
    Name
    Nev
    Join Date
    Dec 2007
    Last Online
    17-04-2024
    Membership ID
    510
    Posts
    17,956
    Country
    United Kingdom
    Location
    Gloucester
    Car
    VR-4+Panda+shed
    My Garage
    Visit
     
    But I wouldn't have thought low pressure on its own would be enough to get all three green bars up? I had a slow puncture a little while back, ended up with 36 PSI on one side, and about 12 on the other. Was only giving me an occasional green bar in a straight line. That's why I'm wondering about it being a sensor, hence suggesting pulling the fault codes. However, it is a no-brainer to check the free & easy stuff first!

  6. #6

    Offline
     
    Name
    Ryan
    Join Date
    Oct 2013
    Last Online
    01-06-2014
    Posts
    40
    Country
    United Kingdom
    Car
    Galant vr4 360
     
    Cheers guys I'll get on to it the mora

  7. #7
    Subaru ETA's Avatar

    Offline
     
    Name
    David
    Join Date
    May 2006
    Last Online
    10-02-2024
    Posts
    5,490
    Country
    New Zealand
    Location
    Blockhouse Bay
    Car
    Corvette
    My Garage
    Visit
     
    Mine would light up at least 2 bars if I had about 5- 10psi difference

Similar Threads

  1. AYC Clutch Drainage Issues
    By Rich_S in forum General / Questions
    Replies: 8
    Last Post: 13-01-2012, 11:11 PM
  2. Is the AYC pump separate from the AYC?
    By djb160 in forum General / Questions
    Replies: 7
    Last Post: 26-05-2008, 07:24 PM
  3. TCS / ABS / AYC issues
    By Wakaba in forum General / Questions
    Replies: 8
    Last Post: 24-01-2008, 06:23 AM
  4. AYC light and wierd sound from AYC pump
    By Mante in forum Gearbox / Transmission
    Replies: 10
    Last Post: 12-03-2004, 12:57 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •