anyone knows the diameter of the vr4 rear sway bar? the bushings need to be replaced and looking to get some prothane ones?
anyone knows the diameter of the vr4 rear sway bar? the bushings need to be replaced and looking to get some prothane ones?
22mm
October 2023 fleet status: 100% operational
| Legnum VR-4S | Fiat Panda 100HP !! | a blue one! | Avensis T-180 | VR-4 parts van! |
Why not become a full member of CVR4 and enjoy the additional benefits membership brings?! Information here.
front is 20mm believe it or not.
i bought universal 22mm polly bushes with C cage to mount it. but i can't remember if it was type A or type B.
The only difference is the spacing between bolt holes.
Bye for Now!
dave,will the prothane 22mm bushings work with the stock C clamps?
no i don't think so but you get the C clamps with the universal bushes from energysuspension.com anyway and as long as you pic the correct hole spacing they bolt straight up to the original bolt holes.
the fronts are the odd ones.
but i found a way of using the 20mm universal one for that as well, looks a bit odd but works.
sorry i meant to say a very long time ago.....
standard replacement bushes are:-
front 20mm
rear 22mm
rear use universal 22mm C clamp unathane bushes all very straight forward like for like swap out just make sure the hole spacing is correct.
fronts are a bit of a odd arrangement.
i will have to take pictures of how i mounted the front bush, to show you as any description will be open to interpretation.