Hi guys, I bought some HID Angel eye lights off @Longbow77 after his VR-4 got stolen and trashed. I believe he said he got them from @swinks. The issue I am having is that one of the controllers (not the ballast) has a power pin that has detached itself (was like this when bought) so 1 of the 4 projectors never worked. Me being anal and liking symmetry then removed the fuse from the matching projector on the other side so Ive been driving with just the 2 projectors (not an issue).
Visited @martin71 and he gave me some wiring harnesses with this controller integrated and smaller. Went to fit them today and I can connect everything up apart from the connector that goes into to the Angel Eyes themselves. The connector on the angel eyes is a small rectangular 4 pin connector whilst the connector on the harnes is a 2 pin connector. I have searched high and low this morning and can only find harnesses with 2 pin connectors and cannot find replacement controllers anywhere online that have the same connectors as the ones I have.
If anybody knows what Im on about what would you suggest I do at this point? Is it a start from scratch situation or can I somehow do this with what I have or is there somewhere I can buy the harness with a 4 pin connector?
Any help greatly appreciated as I love the angel eyes and cannot live without them but would also like to drive the car at night lol.
n.b. I havent had a chance to take the headlights out yet so I have been doing it whilst still on the car