Intake Gaskets

[lancerevo3]

Going to be fitting my injector seals soon ,so as im at it i may aswell do the intake gaskets also .

Camskill have the upper manifold one ,but i dont see a lower one listed .

Or can i get a "kit" which has them all tb seals etc


Mark

[Davezj]

when you say upper do you mean the plenum to inlet manifold gasket.
if so then you do not need any lower gaskets as the inlet manifold does not need to be removed to fit the injector seals.
just thought i would let you know.

[lancerevo3]

Yes thats the one .i just want to do it once and be done as i have a decent leak around this area .
so was thinking of doing the lot as they are getting on in years now tbf

[wintertidenz]

MD327788 - "lower" gasket that goes from the heads to the splitter. You need two.
MD347006 - plenum to splitter.

[lancerevo3]

MD327788 - "lower" gasket that goes from the heads to the splitter. You need two.
MD347006 - plenum to splitter.

Good stuff thanks