Hi all, been a while, thought I should crack on with the old legnum project.
My plan in short is as follows,
Remove front and rear subframe and suspension components to remove all bushes Sand blast and paint all suspension arms and refit with polybushes.
Underseal underneath
Remove engine and gearbox due to oil weep from front head gasket.
Remove cylinder heads
Remove valves decoke and regrinding valves and valve seats
Gas flow cylinder heads
Rebuild with all.new seals and gaskets.
Make nessecary modifications to fit lpg kit.
(Just make it a little less.painful on the wallet for day to day running)
Repaint brembo calipers as looking a little bit tired.
Re bleed brakes with dot 5 fluid
Replace.front exhaust flexible section
Replace plastic boost elbow with stainless one.
Replace all fluids on vehicle.
Aaannddd breathe. ...
All of the above I'm quite happy with but I have a few questions....
My nardi steering wheel is looking a bit tired so I would loke to replace it, can any one tell me what other stwering wheels will fit whist still retaining and o.e. type.look.
Also I have black leather seats but they have basically no bolsters and really don't hold you very well. What other seats fit? Don't mind a little bit of modifying.
Whilst I'm doing all of the above engine out work etc is there anything else i should be doino whilst im there?
Many thanks in advance
Cheers
Matt (nutty1)