Sorry for the delay in updating this, if you've seen my other threads you know there's been issues with the clutch / box causing the car to have been off the road a good while!
Anyway, to update.
- The car was converted to manual and the TCU left connected
- I was already running a 7202 from a manual car, that was previously working fine with TCL. No flashing light and was functioning correctly.
- After the conversion, all the lights on the gear indicator do not illuminate (R does if I turn the reverse switch on)
- TCL light does not flash, and can be turned on and off normally. Does not seem to operate correctly. Skid light illuminates under high power or heavy cornering. Car does not cut power but does "feel" like something is happening. Maybe its breaking on some wheels?
- ASC (the one I want to keep!) SEEMS to be non functional, haven't gotten a skiddy car to come on with TCL turned off.
I was trying to do some diagnostics with EvoScan to see what the TCU was reading from the transmission sensors. I noted at this point that when it usually flashes the "N" in the gear indicator to show fault codes, it still did not illuminate.
My EvoScan does not seem able to start to open the ECU due to an error
Code:
Conversion from String "&HTCU" to type "integer" is not valid
This is before it tries to connect to the ECU so I think its software related.
I had a goggle but couldn't find any results for how to fix this. Any ideas?
I was able to do some datalogging for the AYC ecu giving lots of information, all of which I believe looks normal. I attempted ABS too but as some reported in another thread, the ABS pump goes mad during diagnostics meaning the car is undrivable.