Hi guys after a carbon fiber or fiberglass Bonnet for my galant vr4 would consider both with or without vents.
Cheers
Hi guys after a carbon fiber or fiberglass Bonnet for my galant vr4 would consider both with or without vents.
Cheers
Last edited by Humpty's Revenge; 29-08-2018 at 05:35 PM.
I have a white one with vents, Fibre glass & some bonnet clips. The push button type in black.
Where are you in the country?
Here's the bonnet....
attachment.jpeg
Last edited by 94000 Miles; 13-08-2018 at 01:33 PM. Reason: Adding photo
Still available? any pics?
Hi Dom,
Sorry for late reply.
It has been reserved by another member I'm afraid.
If I see any thing out there I'll give you a PM.
regards
Kev
If you are still looking have you seen bodykitonlinestore. They got FB and eBay page.
Might be worth a try.
Bonnet sold to Jordan_A95.
Cheers was great meeting you! look forward to fitting it
Yeah you'll have put up some pics of it and also maybe do a quick write up of where and how you have the bonnet pins fitted with photos, and if you decide to stiffen the bonnet where you put the bracing, just an idea.
Also with the grill for the vents.....
if you decide to reglue the clips holding them to the underside of the bonnet and get rid of the old clips. I used a couple of weeks ago some much sturdier clips for my front bumper mesh from ToolStation..... the square base is also thin enough to form into bends and be cut with a sturdy pair of scissors to get them into any position you want.
97114.jpg
Part numbers are....
97114 - Self Adhesive Clips 8mm 100 Pack £9.09
26921 - Self Adhesive Clips 4mm 100 Pack £7.05
52425 - Self Adhesive Clips 12mm 100 Pack £12.21
46124 - Self Adhesive Clips 16mm 100 Pack £13.26
the sizes are for the diameter of cable they are designed to secure.
Ask your bodywork guy what glue to use that would standup to the heat from the engine. The adhesive on the back isn't for this application. I buried mine in 3M plastic adhesive with plasters mesh embedded into the glue for extra strength. Or perhaps a hot melt gun would do?
Take care!
Kev