Hi all ,
I would like to know if the coilovers are the same between VR4 and NA ( like EA2/EA5)?
Thank you
Saf
Hi all ,
I would like to know if the coilovers are the same between VR4 and NA ( like EA2/EA5)?
Thank you
Saf
3000GT 1430awhp and 1132nm twin 6466CEA @ 44 psi + Galant VR4 type-S 701awhp @ 1.7 bars 6466CEA + Galant GDI to 4G63 ... In progress
They physically fit as far as I know but spring rates required might not be appropriate.
They fit, even for sedan and legnum.
I use BC racing BR.
Sorry to but in,
Front shock absorbers.. identical between Galant and Legnum?
Sent from my Samsung Galaxy S9 using Tapatalk
2006 VW Passat B6 Tdi 140 BKP (Daily driver)
1996 Legnum VR4 TYpe-S Sophia White (Weekend Toy)
1996 Legnum VR4 Type-S Trigger Mauve (Parts Car)
I bought the BC Racing set from a guy with a Galant sedan non-VR4. Now they are on my Legnum VR4. They fit perfectly.
AS above, they will fit but spring rates would be different.
Not sure if all are changeable, (as long as diameter is the same they should be ok!). D2, from Impulse Performance sell the D2 springs separately so you can buy the springs at the spring rate you want for your set up. They were about £25 each a couple of years ago.
Updating Soon!! 1998 Legnum VR4, fully serviced every 4500 miles. Fully Amsoil'd. Falken 453's, EVO 8 FQ320 rear diff.
My idea is to source galant front shocks. And the springs separately (like from viamoto), specifically designed for the legnum
Sent from my Samsung Galaxy S9 using Tapatalk