I can't seem to get hold of anyone at Eurospec, tried calling and email. ( guessing there no longer trading )
Does anyone know of any other specialist garages I can take my car? Ideally same sort of area but can travel.
TIA.
I can't seem to get hold of anyone at Eurospec, tried calling and email. ( guessing there no longer trading )
Does anyone know of any other specialist garages I can take my car? Ideally same sort of area but can travel.
TIA.
Unfortunately Eurospec are no longer trading.
There's not really many places that know the VR-4 - the best source of knowledge is right here on the forum, in the Resource Library/Technical Articles, which is accessible if you're a paid-up Member (which is just £10 per year).
Someone often hosts garage days (recently, it's been me!) where we all get together for a weekend and do jobs on our cars, and can provide assistance/advice on almost any topic - between us lot here we've more collective knowledge and experience with these cars than any specialist garage.
you could try finding a local evo specialists, they should be familiar with most of the drive-train and have the contacts to get into more of the cars, but even that's limited. Unless they have epic review, i wouldn't bother with your local dealership...
Thanks Gents for the replies.
I have just paid and joined so will have lots of stuff to scroll through no doubt.
Stuart, I'm wanting to do the lash adjusters, have you done this before? Would be good if you have.
thanks again guys.
Hi Jimmy, I see you’re near me. I live in pulborough - about 20 mins away from Horsham, like Stuart got some tools and experience (not a professional, but can lend a hand!).
Professional bodger!
There is a tool you can buy on line to remove and replace the hydraulic tappets without removing the cams or timing gear, I think there is a guide in the members section
Updating Soon!! 1998 Legnum VR4, fully serviced every 4500 miles. Fully Amsoil'd. Falken 453's, EVO 8 FQ320 rear diff.