Done a bit of searching, it seems they will can anyone confirm?
2002 Galant estate V6 to 1996 pre facelift Legnum.
Oh and if they are electric is there a plug?
Many thanks
Paul
Done a bit of searching, it seems they will can anyone confirm?
2002 Galant estate V6 to 1996 pre facelift Legnum.
Oh and if they are electric is there a plug?
Many thanks
Paul
Last edited by Humpty's Revenge; 06-01-2021 at 11:08 AM.
youtube "tha got beef wi me"
i made that.
Straight in, as far as I know. But I *think* that the VR-4 loom doesn't have the redundant wiring and plugs for electric seats. I don't think heated seats were an option in the later UK cars, but if they are heated and you want that element to work, you'd be as well getting the heated seat switches and the centre console cup-holder which houses the switches, as well as as much wiring as possible. The electric adjustment side is all built into the seats themselves, so they should only really need a power supply, I would have thought.
Obviously, make sure things are fused, etc. There might be more useful info in the wiring diagram too.
October 2023 fleet status: 100% operational
| Legnum VR-4S | Fiat Panda 100HP !! | a blue one! | Avensis T-180 | VR-4 parts van! |
Why not become a full member of CVR4 and enjoy the additional benefits membership brings?! Information here.
Hi, I knew someone had done this at some time
https://www.clubvr4.com/forum/showth...electric+seats
Updating Soon!! 1998 Legnum VR4, fully serviced every 4500 miles. Fully Amsoil'd. Falken 453's, EVO 8 FQ320 rear diff.
Just to add 2 pence to already explored left right and centre subject, make sure you get rear bench hinges, things that hold seats up. I cant remember which combo got what (FL vs PFL or UK vs JDM) but they could be thin or thick ones and are PITA to get separately.
His FL Legnum VR4 running 238.8 ATW HP and 500Nm @1.05 bar on LPG
Hers PFL Legnum VR4 COTY see here for full story
Looking for AMSoil? click here
living in north west?
would you like to meet with other VR4 fanatics?
click here
My recent and ex Mitsubishi's
nice one lads, read the stuff, thankfully the ones ive been offered are manual! @adaxo im swapping the interior with a guy with a galant (if i can travel 500 miles there and back to do so!) so I need to swap the hinges out?
cheers
Paul
Think Adam is on about the U-shaped latches which hold the seat back upright. If you're going to be side-by-side with the donor car, it should be easier to check.
If it’s saloon then rear side Bolsters are different and not fit without mods
And as Nev said u shape latches varies so look and you should be able to see difference
Thanks lads