Hi guys, my car has been off the road for a couple of months while I have been doing a few jobs. Front turbo repair, filler neck, MAF repair, I also replaced the idle speed servo. Just fired the car up for the first time. Everything seems to be ok so far but the throttle cable is really baggy. It has gone so slack the pedal is only pulling the cable at the very end of travel. There is about 15mm of play at the plenum bracket. It seems strange as I've not touched it. Any ideas why this could be or how and whether I should adjust it? Photo is the pedal end. Does that look normal?
IMG_20220225_174949_559.jpg