Which injectors bolt straight on to the Legnum?
What are the sizes and specifications i should be looking for?
11mm top?
16mm bottom
48mm length?
Denso connector?
Does this look like a fit?
https://www.shopbtr.com/Injector-Dyn...-4_p_3690.html
Which injectors bolt straight on to the Legnum?
What are the sizes and specifications i should be looking for?
11mm top?
16mm bottom
48mm length?
Denso connector?
Does this look like a fit?
https://www.shopbtr.com/Injector-Dyn...-4_p_3690.html
Last edited by LegnumPower; 24-05-2022 at 06:15 PM.
depend what you are doing with the car.
starndard or upgrade
popular upgrade are ID1000cc injectors
standard injectors are 390cc injectors.
Bye for Now!
Upgrade to ethanol/flexfuel and maybe more power in the future.
I think 1000cc will be plenty enough.
I know that they're supposed to be high impendance, and that I'll need to remap, but I wanted to make sure they'll fit the fuel rail and plenum.
If anyone knows where to get cheap quality ones preferably inside the EU, please tell.
Cheap and Quality don't really go together!
I would go for Injector Dynamics or Fuel Injector Clinic, as they provide matched sets of injectors with VERY accurate injector data. You do pay a small premium for this, but when you're not spending time (and money) trying to tune around mismatched injectors or poor characteristic data, it will work out cheaper overall!
I've installed the Denso 530CC pink injectors on mine. Taken off a Subaru WRX STI. They were a direct swap , same plug and no fuel rail modification needed