So after a suggestion from a friend Iv decided to document my galant build.
It started off with my airtrek with a blown transfer case. I coudnt get my hands on a replacement transfer case so bought a whole parts car just for the transfer.
E6ADB24B-D8F9-4F84-BF5F-608D0FDA9CC7.jpg
Since I had a running 4g63t I got the notion to buy another galant and swap the 2.0 turbo into it.
I found this beauty of a galant. 2.4 gdi Viento, 4wd and 5 speed auto. Ideal candidate as the 2.4 na is very underpowered.
So far Iv the engine almost ready to remove from the airtrek. All wiring disconnected from the engine. Transfer case has already been removed from the car and gone into my now sold airtrek. Gearbox fluid removed and checked for wave spring fragments. Drives and shafts already out. Top mount intercooler removed as I’ll be going with a front mount. So next step is to hoist it out and put it up on an engine stand. Pull the engine harness and ecu.
Then do the same to the galant.
5ED3E33E-8C88-479E-AF38-CC66F4E9F709.jpg 74CE2F01-62CA-4FA0-A2A4-D8BB53808B05.jpg