Anyone interested in a spare Throttle body? You can get them bored out to 63mm which will give you a 10% increase in airflow = more power
ebay link
Anyone interested in a spare Throttle body? You can get them bored out to 63mm which will give you a 10% increase in airflow = more power
ebay link
Richard Batty
2.5ltr V6 Turbo FTO
how on earth do you go about boring one out?
www.rpw.com.au seems to do lots of oversized throttle bodies, that look to be quite good
I can fit a 2.5" (63mm) pipe inside my throttle body with a bit of play. Is the FTO ones smaller?
96-97 Mitsubishi Legnum VR-4 Type-S
Have a read of this http://www.ftooc.org/phpbb/viewtopic.php?t=32224Originally Posted by bradc
Hmm, thats interesting I will go and measure it in a bit as this one came off my VR4 engine and I replaced it with a bored out FTO one.Originally Posted by -LegnumVR4-
Unless they replaced them with larger ones after 1997.
Mines a 96 engine.
You had me worried for a min, just been and measured it and the external bit is more than 63mm but the internal bit that fits on the plenum is 60mm