Altezza Light Conversion

[Rikki]

This could defo sort my problem. Cost and delivery dependant but I might be interest ed soon

[Rikki]

hi guys from the US. i know this is an old topic... but what size are the reverse lights? the reason i am asking is becuase i think i have a CLEAN solution for you in regards to the altezza conversion for the indicator / reverse bulb. they have just released dual filament bulbs here in the US that are LED... the cool part about this is that each filament can be a different color! so you could have one bulb in the reverse section of your altezzas that lights up white for reverse but when you hit your idicator, the white is turned off and replaced by an amber indicator. this is what i am talking about:

SwitchBack LED

btw, we are using them for our front corner lights as most of us here have cleared the corner so that all our lights appear white when off and when running at night... but we keep our amber indicators for signalling.

on a side note, it's funny that you guys want altezzas and we want JDM's... guess it's just what is not readily available that we desire!

Has anyone bought these yet? I am just curious to see if they solved the problem with the reverse light. Cheers

[Spirit]

The Vee has some and hopes to trial them over the coming few weeks and if all ok I will be ordering some......so watch this space

[Rikki]

The Vee has some and hopes to trial them over the coming few weeks and if all ok I will be ordering some......so watch this space

cool cool well if all ok I shall be ordering a set too

[The Vee]

Yep have got a pair. Have tested them with a 12 volt supply and they do what they say on the tin. Will probably need a load bank for the the indicator circuit and of course a suitable bulb holder. The other test is to see that the two circuits are independent of each other internally and don't cause problems between the two circuits when both powered. But as Pete says, watch this space as I hope to have them fitted shortly.