Possibly breaking Legnum VR4 manual

[billybobboot]

If ayc pump works ill take it. Mine works but only below 12-14 deg. Was going to get rebuilt but car would be off road till done

[peter thomson]

If ayc pump works ill take it. Mine works but only below 12-14 deg. Was going to get rebuilt but car would be off road till done

keano has already expresses interest but will check over pump tomorrow if I have time, loosening off teins at mo.

[carfanatic]

How many pennies for the cat back.

[billybobboot]

How many pennies for the cat back.

Not very helpful but ive got a cat back for a panda very rusty. You can have that for pennies.

[GalantOnly]

Peter, can you give me the total £ for downpipes shipped to Denmark?

[carfanatic]

You are wrong about not being much help. It was no help at all. Although it probably is a good match for the rest of the Panda.

[peter thomson]

Sorry for not being on but my daughter is in hospital at the moment so everything is kind of on hold at the moment. Will hopefully get things sorted next week and reply to pms and so on

[Erni902]

Sorry for not being on but my daughter is in hospital at the moment so everything is kind of on hold at the moment. Will hopefully get things sorted next week and reply to pms and so on

Sorry to hear that mate, hope its nothing serious. Family comes first (even before us bunch of degenerates apparently). Seriously though hope your daughter recovers quickly. Wish you and your family well.

Rikki

[Dimes]

May I echo Rikki's sentiments. None of this stuff matters when you've got family to think of.
Best wishes Peter

Can you put my name next to the Cusco rear brace please.
Thanks
Olie

[carfanatic]

Peter, As Rikki says, family comes first. Take your time as this is the real gift we offer our families. Colin.

[Seems Unlikely]

As others said, family first, hope she is improving, PM when you ready and offer of help still there. Corin.

[billybobboot]

You are wrong about not being much help. It was no help at all. Although it probably is a good match for the rest of the Panda.

Yer the panda wasnt even worth anything scrap most of the steel was dust. Only got exhaust as it fell off when we picked the car up by a crane.

side note hope she is ok pete.

[Seems Unlikely]

Yer the panda wasnt even worth anything scrap most of the steel was dust. Only got exhaust as it fell off when we picked the car up by a crane.

side note hope she is ok pete.

I did once try to weld a fiat panda, it was quite challenging as my mig set never had a 'thin as tinfoil' setting, I kept blowing holes in it whilst welding. In the end it was irrelevant as I suffered quite a fantastic engine failure whilst going up the big hill on the m62 to Leeds, it did make it to the top but then blew the engine apart on the downhill, holed block, 3 lanes filled with smoke, oil up the sides of the car and dripping from the exhaust.. It's scrap value wasn't so high either.

[peter thomson]

Thanks all. Should be sorting stuff out again this weekend so will be in touch when parts are sorted out

[2700gavin]

Hi Peter , may be interested in the wheels and also after the fuse box/ Etacs unit.

[dazjb]

Hi. Will you be removing the wiring loom? I'll take it if you are. I'm also after a VR4 ECU.

I'm doing the VR4 FTO engine conversion so may need other bits once i source an engine

Cheers
Darren

[peter thomson]

Hi Peter , may be interested in the wheels and also after the fuse box/ Etacs unit.

Hi the wheels require the spacers to fit with brembos. I'll mark the fusebox/etacs for you.

[peter thomson]

Greddy oil cooler and filter relocation kit £200 Adaxo, dimes
Tein HA's £300 Adaxo, joetheeskimo, keano
Koyo uprated radiator £200
Evo Recaros with mounting rails £250 2700gavin
Harness eye bolts 2700Gavin
harness bar 2700Gavin
Evo style GRP bonnet new from GB £250 dimes
OS Giken Twinplate R2CD clutch dimes
Energy Suspension polyurethane engine mounts £60 dimes
hubs erni902
7202 ecu (foxdie map) 2700gavin
etacs/fusebox 2700Gavin
brembos rear mcosworth
manual conversion Seems unlikely
RPW downpipes, flexis have been replaced £180 GalantOnly
Powerflow catback system Carfanatic
Greddy intercooler kit £250 dodo_irelandIMG_0520[1].JPGIMG_0515[1].JPGIMG_0512[1].JPG
Cusco rear strut bar £80 Dimes
Rear diff ayc, £100
Propshaft £50
Ayc pump £100 keano, Billybobboot

[peter thomson]

Hi loom is no problem and this VR4 has a good engine. I should have other engine ECU's in the shed or loft

Hi. Will you be removing the wiring loom? I'll take it if you are. I'm also after a VR4 ECU.

I'm doing the VR4 FTO engine conversion so may need other bits once i source an engine

Cheers
Darren

[carfanatic]

@peter thompson Have you worked out a price for the exhaust yet Peter. How is your daughter?