If ayc pump works ill take it. Mine works but only below 12-14 deg. Was going to get rebuilt but car would be off road till done
If ayc pump works ill take it. Mine works but only below 12-14 deg. Was going to get rebuilt but car would be off road till done
How many pennies for the cat back.
Live, love, learn but most of all.... Plan.
Peter, can you give me the total £ for downpipes shipped to Denmark?
You are wrong about not being much help. It was no help at all. Although it probably is a good match for the rest of the Panda.
Sorry for not being on but my daughter is in hospital at the moment so everything is kind of on hold at the moment. Will hopefully get things sorted next week and reply to pms and so on
May I echo Rikki's sentiments. None of this stuff matters when you've got family to think of.
Best wishes Peter
Can you put my name next to the Cusco rear brace please.
Thanks
Olie
Peter, As Rikki says, family comes first. Take your time as this is the real gift we offer our families. Colin.
As others said, family first, hope she is improving, PM when you ready and offer of help still there. Corin.
I did once try to weld a fiat panda, it was quite challenging as my mig set never had a 'thin as tinfoil' setting, I kept blowing holes in it whilst welding. In the end it was irrelevant as I suffered quite a fantastic engine failure whilst going up the big hill on the m62 to Leeds, it did make it to the top but then blew the engine apart on the downhill, holed block, 3 lanes filled with smoke, oil up the sides of the car and dripping from the exhaust.. It's scrap value wasn't so high either.
Thanks all. Should be sorting stuff out again this weekend so will be in touch when parts are sorted out
Hi Peter , may be interested in the wheels and also after the fuse box/ Etacs unit.
Hi. Will you be removing the wiring loom? I'll take it if you are. I'm also after a VR4 ECU.
I'm doing the VR4 FTO engine conversion so may need other bits once i source an engine
Cheers
Darren
Greddy oil cooler and filter relocation kit £200 Adaxo, dimes
Tein HA's £300 Adaxo, joetheeskimo, keano
Koyo uprated radiator £200
Evo Recaros with mounting rails £250 2700gavin
Harness eye bolts 2700Gavin
harness bar 2700Gavin
Evo style GRP bonnet new from GB £250 dimes
OS Giken Twinplate R2CD clutch dimes
Energy Suspension polyurethane engine mounts £60 dimes
hubs erni902
7202 ecu (foxdie map) 2700gavin
etacs/fusebox 2700Gavin
brembos rear mcosworth
manual conversion Seems unlikely
RPW downpipes, flexis have been replaced £180 GalantOnly
Powerflow catback system Carfanatic
Greddy intercooler kit £250 dodo_irelandIMG_0520[1].JPGIMG_0515[1].JPGIMG_0512[1].JPG
Cusco rear strut bar £80 Dimes
Rear diff ayc, £100
Propshaft £50
Ayc pump £100 keano, Billybobboot
Last edited by peter thomson; 19-10-2014 at 05:14 PM.
@peter thompson Have you worked out a price for the exhaust yet Peter. How is your daughter?