Sway bar mount breaking

[Bender]

Has anyone else that any issue with breaking the rear mounts for sway bars? I've have broken mine 3 times in the last year,

This time it has clean the mount right off the arm

10390058_10154517773780054_930423131991630963_n.jpg10409229_10154517773635054_4633941070617384417_n.jpg10574214_10154517773565054_3302265202907537502_n.jpg

Any ideas how to stop this from happening?

I have Selby sway bars front and rear.

[peter thomson]

You need to strengthen the mount. Easily done with a thick plate

[Davezj]

Has anyone else that any issue with breaking the rear mounts for sway bars? I've have broken mine 3 times in the last year,

This time it has clean the mount right off the arm

10390058_10154517773780054_930423131991630963_n.jpg10409229_10154517773635054_4633941070617384417_n.jpg10574214_10154517773565054_3302265202907537502_n.jpg

I have Selby sway bars front and rear.

As you have upgraded your sway bar to a stiffer one, you need to upgrade the mount as well as the bar, as Peter has said you will need to weld on a thicker metal plate to mount the bar to.

I have heard of others breaking or bending the rear sway bar mounts but i believe only after they have upgraded the rear sway bar to a stiffer one.

[CANDEE]

The upgrade of the mounts is a HAVE to do with the selby's. The Cusco's dont have the same problem.

Hop over to ozvr4 and have a look on there as most of them have already done this mod.

[scott.mohekey]

Doesn't it require cert if done in NZ?