Got mine today.
Thanks Dave!
Got mine today.
Thanks Dave!
Ex: Galant VR4
Running 268 HP ATW and 443 Nm torque at 0.9 bar
Now: Lancer Evolution 8 FQ-300
Running 325 HP ATW and 510 Nm torque at 1.6 bar
thanks for letting me know thomasz
Bye for Now!
Hey sorry didn't get back to u the other day gonna have to wait till after Xmas now aye
No problems.
I have ordered another batch as someone else wanted some.
They are here when you need them.
Coo thanks Davezj
got mine today dave ,thanks very much
mark
possibly the clubs first manual super
They took there time to get to you mark. But there have been a few bank holidays over that period.
Glad you got them ok.
Last edited by Davezj; 03-01-2015 at 05:15 PM.
ya xmas etc but they arrived in one piece
i still have some of these injecyor seal kits available out of the last batch i bought.
Be daft not to change these before i drop the engine into the FTO. Can you PM me payment details please bud
Cheers
i will pm you my details.
Received today ... cheers matey
glad to hear it.
they are easy to fit as well.
How have you guys been removing the filter basket? It's tight in there and i don't want to damage anything
i removed my filter baskets by finding a screw which will bite into the inside of the filter basket ring on the intrance to the top of the injector, the screw only needs to bite on the ring so the screw does not need to go into the basket very far.
fit the screw into a vice and then screw the injector onto the screw, it can go on quite a way in without any worry i have screwed it by about 20mm without any issues. but you only need to screw it on until you get a good bite in the filter basket ring.
then wiggle the injector from side to side and the basket will come out.
it sound a rough way to do it but it works very well.
here is a video to show you the method. it is the first 1 min of the video that shows you how.
https://www.youtube.com/watch?v=V2sD5UsOnJs
just thought i would point out that the VR4 injector does not have a removable pintle cap.
Do you have a spare 1 or 2 filter baskets, Dave?
I've got to replace an injector or two (after I'd already fitted all the new stuff!) - so whilst I could get away with using the almost new rubber bits, I'll be unable to remove the filter basket without damaging it!
yes mate,
i can pop a couple in the post on monday.
i can get my supplier to send a few more over with the next batch to make the set up.
i have still got your address so all ok there.
You're a star! Do you want some money now, or a couple of quid when I next see you?
no it is ok, the filter are not a major cost, it is the seals that cost the money.
i should be able to get my supplier to throw some in for free with next batch of seals i order.
Last edited by Davezj; 19-01-2015 at 09:14 AM.
Hi could I get a set of these please. @adaxo is going to collect them off you for when he services my car. Do you want me to send you over a paypal payment or give him cash on collection? Thanks