but you are looking at about £800-£1000 for a set of cams plus £300 for a set of stiffer valve springs. as you have to buy 2 sets of 16 to get 24 for yourself.
we have 4 of them and shipping cost from NZ is mighty high as they weigh a lot so about £200 is shipping.
RPW cams are a lot more expensive than adams but i am not sure he is still doing them, i know has project car was put on hold about 4 years ago and he has done nothing with it since.
if my memory serve me right
https://www.kcams.co.nz/
i think adams cams were $800-$1000 the shipping of about $300-$400 plus stiffer valve springs. the exchange rate used to a much better. it was 3 to 1 back in the 2000'S
this is $NZ
i think it was $800 if you gave your old cam shafts to adam, but this was f0r a regrind 264 duration 9.8mm lift
more for full billet cams.
he worked for kennelly cam in NZ
1.94 $NZ to pound at present
RPW cams AU
https://shop.rpw.com.au/product/cams...2-13-dohc-24v/
$1900 plus shipping plus springs
it is an expensive business.
1.8 au dollar to pound at present